Centrifugal Oil Filtration System
HongYi’s centrifugal filtration machine designed to separate particles from water-based or oil-based coolant fluid. In addition, materials can be removed are not limited to ferrous; centrifuge works for non-ferrous materials as well, which include aluminum, stainless steel, silicon, graphite and any other materials that are heavier than fluid.
Main Features
Main Features Of Centrifugal Oil Cleaner
- No filter element, clean oil by“Centrifugal Separation Method”, no replacement element.
- Portable and online by pass.
- LCD touch screen control panel and PLC running program control.
- Automatically running, no need operators to operate.
- Automatically Self-discharging, automatically discharge the slag according to the present time interval. No need operators to discharge manually.
- Achieve greater centrifugal force. Adopt variable frequency design, can adjust the motor speed freely to change the centrifugal force G value, so that the centrifugal force of motor can reach 1700~ 2500G.
- Impurity particles can be separated from 0.45~4μm and above.
HY600
Technical Parameters Of Hy600 Centrifugal Oil Cleaner：
Operating Principle:Centrifugal Separation
Rotor Dirt Holding Capacity:2L
Optimal Flow Volume:40L/min
Centrifugal Force:3500G
Total power:2.29Kw
Outlet pipe diameter:DN65mm
Pressure range:0.4-0.6Mpa
Control mode:Auto/Manual Operation
SIZE:940*770*1500mm
Slag discharge mode:Automatic slag scraping
Max. Flow Volume:60L/min
Rotor Speed:5700rpm
Voltage:380V/50~60Hz
Inlet pipe diameter:DN25mm
Exit height:470mm
control panel:LCD Touch Screen
working temperature:0~80℃
Weight:330Kg
Technical Parameters of Hy800 Centrifugal Oil Cleaner：
Operating Principle:Centrifugal Separation
Rotor Dirt Holding Capacity:3.2L
Optimal Flow Volume:60L/min
Centrifugal Force:2800G
Total power:3.09Kw
Outlet pipe diameter:DN65mm
Pressure range:0.4-0.6Mpa
Control mode:Auto/Manual Operation
SIZE:1050*970*1670mm
Slag discharge mode:Automatic slag scraping
Max. Flow Volume:100L/min
Rotor Speed:4500rpm
Voltage:380V/50~60Hz
Inlet pipe diameter:DN25mm
Exit height:470mm
control panel:LCD Touch Screen
working temperature:0~80℃
Weight:400Kg
hy800
HY1500
Technical Parameters of Hy1500 Centrifugal Oil Cleaner：
Operating Principle:Centrifugal Separation
Rotor Dirt Holding Capacity:8.8L
Optimal Flow Volume:100L/min
Centrifugal Force:2000G
Total power:4.2Kw
Outlet pipe diameter:DN65mm
Pressure range:0.4-0.6Mpa
Control mode:Auto/Manual Operation
SIZE:1430*960*1900mm
Slag discharge mode:Automatic slag scraping
Max. Flow Volume:150L/min
Rotor Speed:3500rpm
Voltage:380V/50~60Hz
Inlet pipe diameter:DN25mm
Exit height:650mm
control panel:LCD Touch Screen
working temperature:0~80℃
Weight:540Kg
Installation Scheme
There is centrifugal oil cleaner installation scheme available as below, and also welcome to customize according to customer’s specific requirements.
Application Cases
Hongyi centrifugal oil cleaner is widely used for industrial fluids/oils cleaning, such as:
Cold forming, wire drawing, quenching, forging, honing, reaming, grinding, turbine oil; compressor oil; gear oil; transmission oil; water glycol based cutting oils; hydraulic oil; straight cutting oil; test bed oils, etc.
